9 - Operation and use
70
9.8 Activating and stopping the packaging cycle
When the film reel has been mounted on the machine and adjustments have been made to the
format it is possible to select the “AUTO” operating mode.
Press the button to start the wrapping cycle.
The board display will show:
To stop the machine press and release the button . The display will show:
ATTENTION!
THE MACHINE ONLY WORKS WITH CLOSED MOBILE GUARDS.
BEFORE ADJUSTING THE POSITION OF THE REEL, FILM OR PRODUCT, MAKE SURE
MANUAL MODE HAS BEEN SELECTED.
9.9 Stopping the machine in an emergency
On the machine near the operator panel there is an emergency button for emergency stops.
Fig. 9.8.1
Fig. 9.8.2
Vers
Menu
M01 MODEL 01
ACTIVE FORMAT
AUTOMATIC
SYSTEM RUNNING
OPERATION MODE
MACHINE STATUS
PACKS NUMBER:10
M01 MODEL 01
ACTIVE FORMAT
AUTOMATIC
STOPPING SYSTEM
MACHINE STATUS
Vers
PACKS NUMBER:0 Menu
OPERATION MODE
To Next Page
Loading...
