91
Once it has been saved the "wait ..................." message will appear for a few seconds.
Press the key for more than 3 seconds to exit without saving.
9.14 Operator menu
This menu allows the operator to perform operations required to manage the packaging
process.
1 - Packs counter
The parameter is activated by setting a value ≠0.
In this case the machine processes a number of packages equal to setting and the display
shows the number of packages that still need to be processed.
Once this value has been reached, the machine stops, and the parameter is automatically
reset to zero.
When the parameter is deactivated (setting =0) this display will show a count of packages
processed.
2 - Remaining packs
The parameter displays the number of packages that still need to be worked if the "PACKAGE
COUNTER" has been set. Any STARTS or STOPS have no influence on the packs count. The
Fig. 9.14.1
Fig. 9.14.2
Esc
Menu
OPERATOR MENU
MAIN MENU
DATA DISPLAY
INSERT PASSWORD
60
OPERATOR MENU
PACKS
COUNTER
[N]
Esc
Mod
To Next Page
Loading...
