9 - Operation and use
92
packs that caused an error are not reckoned. In order to RESET the count, finish the number
of programmed packs or reset the value from PACK COUNTER.
3 - USB parameters printing
After connecting a USB stick (preferably empty) to the operator panel, this parameter will
generate a file on it called “USB_PAR.htm” that contains all of the parameters set for every
format memory.
9.15 Data display menu
With this menu you can view statistical data regarding packaging and technical data to control
the machine's electronic modules.
Important statistical information and data:
1 - Temperatures of the B1 and B2 sealing bars
Shows the temperatures of the sealing bars.
B1 = side sealing bar
B2 = front sealing bar
Fig. 9.14.3
Fig. 9.15.1
30
OPERATOR MENU
REMAINING
PACKS
[N]
Esc
230
DATA DISPLAY
BARS TEMPERAT. [°C]
B1
B2
Esc
230
To Next Page
Loading...
