Smipack FP6000CS - Page 94

9 - Operation and use
94
5 - Print alignment (optional - only if applicable)
This value is shown only when the "mark reading" function is enabled.
6 - Snap production
Estimate of packs that can be wrapped in 1 minute.
7 - Average production
Number of packages made per minute based on the total number of packages produced since
the machine was turned on.
Fig. 9.15.5
Fig. 9.15.6
Fig. 9.15.7
DATA DISPLAY
FILM MARK OFFSET
[mm]
Esc
XXX
XX
DATA DISPLAY
SNAP
PRODUCTION
[N/min]
Esc
XX
DATA DISPLAY
AVERAGE
PRODUCTION
[N/min]
Esc