Stihl MS 362 - Page 94

93MS 362, MS 362 C
: Push the fuel hose (1) back a little
– the fuel hose is disconnected.
: Remove the carburetor (1).
– Check the carburetor and service
or replace if necessary.
– Install a new fuel hose, b 11.2
0001RA461 TG
1
0001RA356 TG
1
Installing
: Check that the sleeve (1) and
washer (2) are in place.
: Push the carburetor (1) into
position.
– The fuel hose must be located in
its seat (arrow).
: When positioning the carburetor,
make sure the stub (1) is pushed
into the fuel hose.
0001RA086 TG
1
2
0001RA358 TG
1
0001RA465 TG
1
: Shoulder (arrow) must fully
engage the intake manifold (1).
Machines with Handle Heating
: Fit the heating element (1).
– Install the filter base, b 12.3
– Install the air filter, b 12.1
– Check operation.
– Reassemble all other parts in the
reverse sequence.
– Tightening torques, b 2.5
0001RA359 TG
1
0001RA360 TG
1