Chapter 9 Storage Devices 9-9
TABLE 9-2 describes the 535-megabyte Seagate drive’s factory jumper settings.
TABLE 9-2 535-Mbyte Seagate Drive Configuration Jumpers
Abbreviation Description Factory Set
RS Reserved No
DS Motor start delay No
ME Motor start is enabled at unit’s start
command
Yes
WP Write protect disabled No
PE Parity disabled Yes
SS Reserved No
TP Drive does not supply power termination
to itself
No
TP Drive does not supply power termination
to the SCSI bus
No
To Next Page
Loading...
