10-4 Sun Ultra 45 and Ultra 25 Workstations Service and Diagnostics Manual • May 2006
You can display your system’s current and default parameter values by typing
printenv at the ok prompt. For example:
ok printenv
Variable Name Value Default Value
asr-policy normal normal
test-args
diag-passes 1 1
local-mac-address? true true
fcode-debug? false false
scsi-initiator-id 7 7
oem-logo No default
oem-logo? false false
oem-banner No default
oem-banner? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
output-device screen screen
input-device keyboard keyboard
auto-boot-on-error? false false
error-reset-recovery sync sync
load-base 16384 16384
auto-boot? true true
boot-command boot boot
diag-file
diag-device net net
boot-file
boot-device disk net disk net
use-nvramrc? false false
nvramrc
security-mode none No default
security-password No default
security-#badlogins 0 No default
verbosity min min
diag-trigger none none
service-mode? false false
diag-script normal normal
diag-level max max
diag-switch? false false
To Next Page
Loading...
Need help?
General
