A-2 Sun Ultra 45 and Ultra 25 Workstations Service and Diagnostics Manual • May 2006
■Solaris Common Desktop Environment: User’s Guide at:
http://docs.sun.com/app/docs/doc/806-4743/6jdq6q2li?a=view
or:
http://www.sun.com/documentation/
â– power.conf (1M) man pages
A.2 Using Dtpower
Dtpower has two preconfigured power management modes: minimal and standard.
There is also a mode for customizing the settings.
TABLE A-1 provides information
about the different modes.
Before you configure power management, consider the way that you use the Sun
Ultra 45 or Ultra 25 workstation. For example: is the workstation used as a server? If
so, use only minimal power management, or none at all.
The power.conf application provides greater controls on power management, such
as managing multiple disk drives and other devices. For more information see the
power.conf (1M) man pages.
TABLE A-1 Dtpower Power Management Modes
Mode Power Management
Minimal Only the displays go into low-power mode.
Standard All devices go into low-power mode.
Customized Allows user to customize settings for displays and disks.
Disabled No power management for any device.
To Next Page
Loading...
Need help?
General
