Index-5
warning messages, 11-15
power
cycling, 10-12
supply
replaceable component, 2-9
power management
enabling, A-3
modes, A-2
overview, A-1
power off procedures, 2-4
power on
sequence, 7-6
power supply
installing, 5-6
removing, 5-4
replacing, 5-4
powering on workstation, 6-3
power-on
reset, 11-6
self-test, 11-1
precautions, safety, 2-1
preparing for replacement, 2-1
probe-ide utility, 12-4
probe-scsi utility, 12-3
process ID, 9-14
product overview, 1-1
prompt
obdiag, 12-8
ok, 10-2
prstat command
examples, 9-15
options, 9-15
overview, 9-15
prtconf command
examples, 9-10
options, 9-10
overview, 9-9
prtdiag command
examples, 9-9
options, 9-8
overview, 9-8
ps command
examples, 9-14
options, 9-14
overview, 9-13
R
registered DIMMs, C-7
removing
audio USB board, 4-6
battery, 3-10
DIMMs, 3-7
DVD-dual drive, 4-6
fan tray, 5-2, 5-3
hard drive, 4-2
motherboard, 3-20
NVRAM, 3-11
optical drive, 4-6
PCI cards, 3-14
power supply, 5-4
replacement procedures, preparing for, 2-1
replacing
audio USB board, 4-6
battery, 3-9
cables, hard drive interface, 4-4
DIMMs, 3-3
DVD-dual drive, 4-6
fan tray, 5-1
hard drive, 4-2
I/O module, 4-6
memory, 3-3
motherboard, 3-20
NVRAM, 3-11
PCI cards, 3-13
power supply, 5-4
required tools, 2-3
S
safety
precautions, 2-1, 2-2
symbols, 2-2
SCSI testing, OpenBoot PROM, 12-3
SDRAM, 1-1, C-4
SEEPROM
NVRAM, 10-1
testing, SunVTS, 13-1
testing
OpenBoot Diagnostics, 12-8
serial port
parameters, 11-18
symbol, 1-5
testing, OpenBoot Diagnostics, 12-8
testing, SunVTS, 13-1
To Next Page
Loading...
