3-26 Sun Ultra 45 and Ultra 25 Workstations Service and Diagnostics Manual • May 2006
10. Install the PCI cards and the DIMMs.
Refer to:
■ “Installing a PCI Card” on page 3-18
■ “Replacing the DIMMs” on page 3-3
11. Inspect the motherboard to verify that:
■ Cable connections are tight and cable clips are secured.
■ DIMMs are properly installed.
■ NVRAM is tight in the socket.
■ PCI cards are properly seated and secured.
12. Reassemble the workstation, power on the system, and verify the motherboard
installation.
Refer to “Finishing Component Replacement” on page 6-1.
To Next Page
Loading...
