1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-90
VLAN Mapping
Clicking the VLAN MAPPING tab brings up the VLAN MAPPING page (Figure 5-73), whose
table contains one entry for each instance of MSTP. The parameters for this page are
shown in Table 5-56.
Restricted Role This parameter specifies the Restricted role status of the port.
Restricted TCN This parameter indicates the Restricted TCN status of the port.
Figure 5-73. VLAN Mapping Page
Table 5-56. VLAN Mapping Page Parameters
Parameter Description
MSTP Instance ID
This parameter specifies the Instance ID, which is the index of the table. The
allowed value ranges from 1 to 16.
Map VLAN
This parameter specifies the list of VLANs to be mapped to this instance of the
spanning tree. The allowed value ranges from 0 to 61440. The default priority
value is 32768
Add VLAN
This parameter specifies the list of VLANs to be mapped to this instance of the
spanning tree.
Delete VLAN
This parameter specifies the list of VLANs to be unmapped from this instance of
the spanning tree.
Table 5-55. CIST Settings Page Parameters (Continued)
Parameter Description
To Next Page
Loading...
