Suzuki RM125 - Removal

KICK STARTER 8-3
REMOVAL
• Drain transmission oil. (2-9)
• Drain engine coolant. (12-3)
• Remove the brake pedal. (5-5)
• Remove the kick starter lever.
• Disconnect the radiator hose 1.
• Remove the crankcase cover.
• Remove the clutch and primary driven gear assembly.
(7-3, -6)
• Remove the snap ring 2, washer 3 and kick starter idle gear
4.
 09900-06107: Snap ring pliers
• Unhook the kick return spring and remove the kick starter
assembly 5.
• Remove the kick starter guide 6.
• Disassemble the following parts from the kick starter shaft.
Spring 7
Kick starter 8
Spring guide 9
Kick return spring 0
Kick starter drive gear A
 09900-06107: Snap ring pliers