Suzuki RM125 - Steering; Removal

16-18 FRONT FORK AND STEERING
STEERING
REMOVAL
HANDLEBARS
• Place the motorcycle on a block to lift front wheel off the
ground.
• Remove the front number plate and protector.
(5-2, 16-4)
• Remove the clamps.
• Remove the clutch lever 1.
• Remove the engine stop switch 2.
• Remove the left handle grip 3.
NOTE:
Mark the paint mark to the matching surface of clutch lever
holder and handlebars, left handle grip and handlebars before
removing.
• Remove the front brake master cylinder.
NOTE:
Mark the paint mark to the matching surface of master cylinder
holder and handlebars before removing.
• Loosen the throttle assembly mounting bolts.
NOTE:
Mark the paint mark to the matching surface of throttle holder
and handlebars before removing.
• Remove the handlebar holder bolts and remove the handle-
bars.
NOTE:
Mark the paint mark to the matching surface of handlebar holder
and handlebars before removing.