Suzuki RM125 - Crankshaft Installation

10-10 TRANSMISSION AND CRANKSHAFT
• Remove the bearings 9 and 0 using the special tool.
 09917-50410: Bearing remover
• Remove the bearing A using the special tools.
 09921-20200: Bearing remover
09930-30104: Sliding shaft
• Install the bearings with the special tool.
 09913-70210: Bearing installer set
• Apply THREAD LOCK SUPER to the shift cam bearing
retainer screws.
99000-32030: THREAD LOCK SUPER “1303”
CRANKSHAFT INSTALLATION
• Fit the crankshaft into the left crankcase half with the special
tool.
 09910-32812: Crankshaft installer
09910-32820: Crankshaft installer attachment