Suzuki RM125 - Reassembly

12-6 COOLING SYSTEM
• Remove the bearing with the special tool.
 09921-20240: Bearing remover set
OIL SEAL
• Inspect the oil seal for damage.
• Remove the oil seal with the suitable size socket wrench.
REASSEMBLY
• Apply THREAD LOCK SUPER to the outer surface of the oil
seal.
99000-32110: THREAD LOCK SUPER “1322”
(or equivalent thread lock)
• Press the oil seal with the suitable size socket wrench.
• Apply grease to the oil seal lip.
 99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent grease)