Suzuki RM125 - Front Caliper Removal and Disassembly

15-8 FRONT AND REAR BRAKES
FRONT CALIPER REMOVAL AND
DISASSEMBLY
• Drain brake fluid. (15-4)
• Place a rag under the brake hose union bolt to catch spilled
brake fluid.
• Disconnect the brake hose.
• Remove the caliper mounting bolts 1.
• Remone the caliper.
• Remove the brake pads (15-5)
• Remove the spring 2.
• Remove the caliper bracket 3 from the caliper.
• Remove the boots 4.
• Remove the spring 5.
• Wrap the caliper with a rag to prevent brake fluid scatter and
piston pop-out.
• Apply low-pressure air into the caliper through the hole to
remove the pistons.
WARNING
Fingers can get caught between piston and caliper
body when removing the piston.
Do not place your fingers on the piston when remov-
ing the piston.