TRANSMISSION AND CRANKSHAFT 10-5
• Remove the driveshaft assembly 6 and countershaft assem-
bly 7.
CRANKSHAFT REMOVAL
• Remove the crankshaft with the special tool.
09920-13120: Crankcase separating tool
TRANSMISSION INSPECTION
• Inspect the gear teeth, dogs, and gearshift grooves for abnor-
mal wear and damage.
• Inspect the bushings and splines for abnormal wear and dis-
coloration.
• Inspect the gearshift cam groove for abnormal wear and dam-
age.
• Inspect the gearshift forks and shafts for wear and damage.
CAUTION
Be careful not to damage the thread part of the crank-
shaft.
To Next Page
Loading...
