Suzuki RM125 - Clutch Cable; Major Adjustment; Minor Adjustment; Throttle Cable

2-12 PERIODIC MAINTENANCE
CLUTCH CABLE
Adjust the clutch cable play as follows:
MAJOR ADJUSTMENT
• Loosen lock-nut 1.
• Turn adjuster 2 so the clutch lever has 10 – 15 mm (0.4 – 0.6
in) play at the clutch lever end before pressure is felt.
• Tighten lock-nut 1.
 Clutch lever play: 10 – 15 mm (0.4 – 0.6 in)
MINOR ADJUSTMENT
• Turn adjuster 3 so the clutch lever has 10 – 15 mm (0.4 – 0.6
in) play at the clutch lever end before pressure is felt.
 Clutch lever play: 10 – 15 mm (0.4 – 0.6 in)
THROTTLE CABLE
Adjust the throttle cable play as follows:
• Loosen lock-nut 1.
• Turn adjuster 2 so the throttle grip has 2.0 – 4.0 mm (0.08 –
0.16 in) play in circumference.
• Tighten lock-nut 1.
 Throttle cable play A: 2.0 – 4.0 mm (0.08 – 0.16 in)
• Remove the throttle housing cover.
10 – 15 mm
(0.4 – 0.6 in)
WARNING
Inadequate throttle cable play can cause engine speed
to rise suddenly when you turn the handlebars. This
can lead to loss of rider control.
Adjust the throttle cable play so that engine speed
does not rise due to handlebar movement.