Suzuki RM125 - Removal

GEARSHIFTING 9-3
REMOVAL
• Drain transmission oil. (2-9)
• Drain engine coolant. (12-3)
• Remove the gearshift lever 1.
NOTE:
Mark the gearshift shaft head at which the gearshift lever slit set
for correct reinstallation.
• Remove the right crankcase cover. (8-3)
• Remove the clutch assembly. (7-3, -6)
• Remove the gearshift shaft 2 and washer 3.
• Remove the pawl lifter 4.
• Remove the gearshift cam driven gear 5.
NOTE:
Be careful not to drop the pins and springs when removing the
gearshift cam driven gear.
• Remove the gearshift pawls 6, pins 7 and springs 8.