8. Hold the microphone protective
sleeve and the top cone with one
hand, use the other hand to screw on
the extension sleeve, rotating it
clockwise.
Tighten it to the stop, but "carefully"
- too strong tightening can cause
loosening of the left screw inside.
9. Slide the foam windscreen onto the
extension sleeve and push the foam
until you see the lateral hole.
10. Insert the 3 mm Allen key into the
hole.
11. Holding the Allen key and the
extension sleeve in one hand to keep
them still, use the other hand to
screw on the top cone with the anti-
bird spikes, rotating it clockwise.
Tighten it to the stop, but "carefully"
- too strong tightening can cause
loosening of the left screw inside.
hold firmly with
one hand
screw the
extension sleeve
push the foam windscreen
until you see the lateral hole
hold the Allen key
firmly in one hand
To Next Page
Loading...
Need help?
General
