12 Software description
CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032 103
displayed and you will have the option to abort opening the listmode file
or to open the listmode file and remove the compensation file from the
Playlist item.
Save As: The button is enabled when a single compensable Playlist item
is selected in the Playlist. Click the button to save the current
compensation file with a new file name.
Copy: The button is enabled when at least one of the selected items
contains a compensable listmode file and/or compensation file. Click the
button to copy the compensation files of the selected item(s) to the
clipboard. They can then be pasted into the Playlist.
Paste: The button becomes enabled when there is a compensation file
from the Playlist copied into the clipboard and at least one of the selected
items is compensable.
If a single compensation file is copied, clicking the Paste button will paste
the clipboards’ compensation file into all selected items in the Playlist.
If multiple compensation files are copied, clicking the Paste button will
paste the clipboards’ compensation files into the relevant selected items
in the Playlist. Pasted compensation files will be pasted in the same
order in which they appeared in the Playlist when copied. If you attempt
to paste more items than are currently selected in the Playlist, as many
items as possible will be pasted, any excess items will be ignored. If the
target selection contains more Playlist items than the clipboard contains
copied compensation files, the pasted compensation files will be
repeated until all selected Playlist items are pasted a compensation file.
When pasting a single or multiple compensation files, the parameters in
the compensation files may not match those in the listmode file. In this
case, the copied compensation files will be applied to the compatible
items in the Playlist but not to the incompatible ones, and a
corresponding message is displayed.
If the parameters do not match and the item is not currently open, the
message will only be displayed when you try to open the item containing
the incompatible listmode and compensation files.
Use listmode: The button is enabled when at least one of the selected
Playlist items is compensable.
Click the button to replace the compensation files of all items containing
a high-resolution data file with the compensation settings stored in the
FCS file headers. Any selected items that don’t contain high-resolution
data will not be updated, and a corresponding message will be displayed.
To Next Page
Loading...