SYSMEX CyFlow Cube 8 - Page 122

12 Software description
122 CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032
 Line Colour: The button is enabled when one or more line objects are
selected in the report. Click the button and select the desired colour for
the currently selected lines.
 Sort Stats: The button is enabled when a statistics box is selected in
reports. It is also enabled when multiple statistics boxes are selected
provided the selected statistics boxes contain exactly the same statistics.
Click the button to display the "Sort Statistics" dialogue. Use the up/down
arrows to define the left to right column order. Select the statistic to sort
rows by and whether to sort rows in ascending or descending order as
required.
 Dash Style: The box is enabled when one or more line objects are
selected in the report. Click the arrow to display a drop-down list and
select the desired dash style.
 Line Width: The control is enabled when one or more line objects are
selected in the report. The default line width for inserted lines is 1.00 pt.
Type in the desired width or use the up/down arrows to adjust the width.
The line width must be between 0.25 pts and 50 pts.
 Edit Text: The button is only enabled when a single text box is selected
in the report. Click the button and enter the desired text into the edit field.
The maximum number of characters is 8000.
 Textbox Filled: The check box is only enabled when one or more text
boxes or fields are selected in the report. Select the check box to show
the selected text boxes filled.
Arrange group
The Arrange group contains options to move, align and resize report items.
The Arrange group contains the following options:
 Bring To Front: The button is enabled when one or more objects are
selected on the same page and section (header, footer, body). Click the
button to move the selected objects to the front of the view, making them
appear on top of non-selected objects.
 Send To Back: The button is enabled when one or more objects are
selected on the same page and section. Click the button to move the
selected objects to the back of the view, making them appear behind
non-selected objects.
 Align: The button is enabled when two or more objects on the same
page and section are selected. Click the button to display a drop-down
list and select how to align the selected objects. When aligning objects,
they are subject to a bounds check. If an object lies outside the bounds