SYSMEX CyFlow Cube 8 - Page 152

12 Software description
152 CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032
 Panel: In this submenu, options are provided to save the panel, to insert
or replace a panel, to add an item to the panel and to clear the panel, i.e.
to delete all Worklist items associated with this panel.
When saving a panel, the full path and file extension are stripped and the
Workspace name is used as an identifier. If there are multiple Workspace
files present within the panel with the same name, a unique identifier is
added to the Workspace file name to differentiate the Workspace files.
When replacing a panel, the selected panel in the Worklist will be
removed, and the chosen panel will be inserted into the Worklist, with the
first item of the panel at the same position the first item of the previous
panel was at.
The "Add Item" option will duplicate the last row in the panel. The option
is only enabled when at least one undefined item is directly below the
panel.
The "Clear Panel" option is disabled if LMD files are present in any of the
selected panels. The option will clear the selected panel(s) from the
Worklist and reset the Worklist items to an undefined state.
 Workspace: In this submenu, options are provided to create a new
Workspace file, to save the Workspace file, to replace the Workspace file
or to apply the Workspace file to a panel or to the complete Worklist.
The "New Workspace" option will create a default Workspace file for the
selected Worklist item. The option is disabled when more than one
Worklist item is selected or when a compensation setup panel is active.
 Instrument Settings: In this submenu, options are provided to save or
replace the instrument settings and to apply the instrument settings to the
panel.
When saving the instrument settings, the threshold, threshold logic,
voltages and compensation settings will be saved to the target file.
 Stop conditions: In this submenu, the option to apply the selected stop
conditions to the panel is provided.
 Clear LMD: Click the menu item to clear the listmode data from the
Worklist item. The check mark in the "Acquired" column is no longer
displayed indicating that new data can be acquired on this Worklist item.
This option is only available if data are acquired on this Worklist item.
 Clear Item: The option is only enabled if a single Worklist item is
selected that is the first or last item of a panel. Click the menu item to
clear all settings from the Worklist item. This option is only available if no
data are acquired on this Worklist item.
 Copy: The menu item is only available if the context menu is launched
from a manual entry field ("Lab #", "Sample ID" or "Stop Value" columns).
Click the menu item to copy the text from the column of the selected
Worklist items to the clipboard.