12 Software description
CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032 157
Selecting Playlist items
To edit Playlist items, they need not to be activated but must be selected.
Selected Playlist items are highlighted in blue.
The following options for selecting Playlist items are available:
Single click on a Playlist item to select it.
To select multiple items, hold down the Ctrl key or Shift key while
selecting the items.
To select all the items in the Playlist, press Ctrl + A.
To select all items from the currently selected one to the end of the list,
press Ctrl + Shift + End.
To select all items from the currently selected one to the beginning of the
list, press Ctrl + Shift + Home.
To invert the selection, press Ctrl + Shift + A.
Playlist context menus
Context menus within the Playlist allow for easy access to the most
commonly used functions.
For editing, context menus are available throughout the Playlist.
By right-clicking on the blank area of the Playlist pane, options for opening a
new Playlist, opening an existing Playlist and saving the Playlist as are
provided. The functionality is the same as in the File tab of the Ribbon.
If the cursor is placed in the "Listmode" column, the main context menu
described here is displayed on right-clicking. In the "Workspace" and
"Compensation" columns of the Playlist, only the relevant submenu is
displayed.
The main context menu provides the following options:
Insert Item: Click the menu item to insert a new Playlist item above the
currently selected Playlist item.
Remove Item: Click the menu item to remove the selected Playlist item.
Replace Listmode: To replace the selected Playlist items, click the
menu item and select the desired replacement listmode file(s).
Clear Listmode: Click the menu item to clear the listmode file from the
Playlist item.
Workspace: In this submenu, options are provided to replace the
Workspace, to assign a new Workspace, to save, copy and paste the
Workspace file. The functionality of these submenu items is the same as
in the Workspace group in the Playlist tab of the Ribbon (see chapter
12.4.9 Playlist tab on page 100).
The "Apply to Playlist" option copies the Workspace file of the selected
Playlist item and pastes it to all Playlist items in the Playlist.
To Next Page
Loading...