SYSMEX CyFlow Cube 8 - Page 180

12 Software description
180 CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032
The following objects can be inserted into reports:
 plots,
 statistics boxes,
 compensation matrices,
 fields (objects containing derived contents such as file names, file paths,
etc.),
 images,
 text boxes (boxes provided for entering free text),
 lines.
Each report page consists of three separate sections: header, body and
footer. All elements of the header and footer sections are repeated on all
pages of the report.
If the source information for an inserted object is unavailable, a red
exclamation mark will be displayed on the report. If the source information of
the associated Playlist item is unknown, a blue question mark will be
displayed on the report. If a field has been inserted and the value is not
present in the file or if a file is not present, "ERROR" will be displayed
instead of the value.
Inserting objects into a report
In Playlist mode, objects from any item of the current Playlist can be inserted
into a report. In Worklist mode, objects from the current panel of the Worklist
can be inserted.
There are several possibilities to insert objects into a report:
 From the Insert group of the Report tab of the Ribbon, click the desired
button to display a drop-down list and select the desired object.
To insert this object in a default size, click into the desired page section
(i.e. header, footer or body) of the report. The object is bounds checked
to the section and resized and/or repositioned as necessary.
To insert the object in a custom size, drag out an insertion rectangle to
the required size of the object and then release to insert the object at the
desired size. Starting a drag in a particular page section (i.e. header,
footer or body) restricts the insertion rectangle to the bounds of that
section.
An object can be inserted into a report if the cursor is displayed as a
crosshair when moved over a reports page. If an object cannot be
inserted, a "no entry" sign is displayed. The cursor remains a "no entry"
sign until the object is inserted in a valid location or the Esc key is
pressed.
 Plots and statistics can also be inserted into a report by sending them
from the Plots area of the Workspace. For this purpose, select one or
more plots in the Plots area of the Workspace. Right-click to display a