Technogym EXCITE+ - Disassembling the Lateral Guards

EXCITE + - Crossover: Technical Service guide- Ver. 4.1
Pagina 7.30
7.8.2. DISASSEMBLING THE LATERAL GUARDS
Figure 7.8-2
Carry out the procedure described in paragraph:
7.8.1. “Disassembling the upper ”.
On both side:
1. Back off the 5 screws (a)
using a 4mm
hexagonal wrench.
Figure 7.8-3
2. Loosen the 2 screws (b)
using a 5mm
hexagonal wrench.
3. Remove the guard (c)
Figure 7.8-4
To reassemble the lateral guards,
follows the above steps in the reverse order.
During the reassembly place the
screws as follow indicated:
• X = long screw;
• Y = short screw;
• Z = medium screw.