Technogym EXCITE+ - The Machine Is Not Flat

EXCITE + - Crossover: Technical Service guide- Ver. 4.1
Pagina 8.8
8.6. THE MACHINE IS NOT FLAT
This problem may be due to the positioning of the machine on a not flat surface. To solve this
problem it is necessary to act on foot adjustment.
Figure 8.6-1
The equipment is levelled by adjusting the two front feet:
1. Loosen the counter-nut (B) and screw or unscrew the feet (A)
until the frame is in a stable
position.
2. Tighten up the counter-nut (B) after adjusting.