Technogym EXCITE+ - Errors Log; Read from Low Kit; Reset Errors

EXCITE + - Crossover: Technical Service guide- Ver. 4.1
Pagina 9.19
9.3.5. ERRORS LOG
This function accesses the machine’s error history log. To access this menu, when the display
shows:
ERRORS LOG
Press ENTER. This function is structured as follows:
ERRORS LOG
Error 10
Error 1
RESET ERRORS ?
READ FROM
LOW KIT ?
.......................
COM.Fault
In addition to the error history log, this function also includes the 3 sub-functions described below:
9.3.5.1. Read from low kit
To read the errors stored in low kit memory and view them on the display, scroll using the +/- keys
until the display shows:
READ FROM LOW KIT ?
Press ENTER to read the errors from the low kit, and return to the upper menu level by pressing
CLEAR for a few seconds.
9.3.5.2. Reset Errors
To clear the error history in both the low and high kit memory, scroll using the +/- keys until the
display shows:
RESET ERRORS ?
Press ENTER to clear the error history logs, and return to the upper menu level by pressing
CLEAR for a few seconds.