Technogym EXCITE+ - Page 84

EXCITE + - Crossover: Technical Service guide- Ver. 4.1
Page 6.14
2
NO
Is the voltage at the input
of the Brake Board
correct?
NO
YES
Replace
CU312 cable
NO
Replace the power entry
module
YES
Check if there are the
voltages at the output of
the Brake Board.
YES
Replace the
Brake Board
4
B
Check if there are the
voltages at the input of the
CPU Board.
Replace
CPU Board
NO
YES
5
3
Is the voltage at the
output of the power entry
module correct?
Replace the
connecting between
High Kit and Low Kit
NO
2
3