5-20
5-3 Speed Mode
Speed Mode is used in situations where precise speed control is required, such as Braiding
Machines, Drilling Machines, and CNC Machines. The user shall set Cn001 (Control Mode Selection)
in accordance with the mode to be used. The setting method is as follows:
Cn001 Control Mode Selection
Initial Value Unit Setting Range Effective RS-485 Address
2 -- 0 ~ E Power Re-set 0001H
Setting Description:
Setting Description
1 Speed Control
3 External Position / Speed Control Switching
4 Speed / Torque Control Switching
7 Internal Position / Speed Control Switching
To Next Page
Loading...
