5-147
5-6-12 Encoder Signal Dividing Output
The Encoder Signal of Motor can be dividing processed by this Device and output to the
Supervisory Control. Refer to the following diagram:
Dividing Processing means the number of pulse signals generated with one revolution of the
Motor Encoder that is converted into number of pulse signals pre-set by Cn005.
Cn005 Encoder Signal Dividing Output
Initial Value Unit Setting Range Effective RS-485 Address
Determined by the Encoder
2500: 2500ppr
8192: 15bit
32768: 17bit, 23bit
pulse 16 ~ 2097152 Re-start Power 0005H/0006H
Setting Description: Dividing Process means the number of pulse signals generated with one
revolution of Motor Encoder is converted into preset by Cn005
Number of pulse signal. Example: The Motor Encoder is a 131072 pulse output
with one revolution, if to obtain a 1000 pulse dividing output, please set
Cn005=1000 directly.
★ The power must be re-started for the setting value to be valid, and the dividing output and speed
have a certain relationship limit.
Lower Limit
Value
(ppr)
Upper Limit
Value
(ppr)
Basic
unit
PPR4
Maximum
Rotational Speed
10000 32768 131072 8388608
16 2048 1 Suitable Suitable Suitable Suitable 6000
2049 16384 1 Suitable Suitable Suitable Suitable 6000
16386 32768 2 - - Suitable Suitable 6000
32772 65536 4 - - - Suitable 3000
65544 131072 8 - - - Suitable 1500
131088 262144 16 - - - Suitable 750
262176 524288 32 - - - Suitable 375
524352 1048576 64 - - - Suitable 188
1048704 2097152 128 - - - Suitable 94
To Next Page
Loading...
