TECO JSDG2S-75B-E - Page 369

7-7
Parameter Code Name and Function Unit RS485 Index
-- Sn206
Speed Command One Time Smoothing Acceleration /
Deceleration Time Constant
ms 0206H 2206H
-- Sn207
Speed Command Linear Acceleration / Deceleration
Time Constant
ms 0207H 2207H
-- Sn208
S-type Speed Command Acceleration / Deceleration
Time Setting
ms 0208H 2208H
-- Sn209 S-type Speed Command Acceleration Time Setting ms 0209H 2209H
-- Sn210 S-type Speed Command Deceleration Time Setting ms 020AH 220AH
-- Sn211 Speed Loop Gain 1 Hz 020BH 220BH
-- Sn212 Speed Loop Integration Time Constant 1 0.01ms 020CH 220CH
-- Sn213 Speed Loop Gain 2 Hz 020DH 220DH
-- Sn214 Speed Loop Integration Time Constant 2 0.01ms 020EH 220EH
-- Sn215 Zero Speed Determined Value rpm 020FH 220FH
-- Sn216
Analog Speed Command Proportioner
(Note 1)
rpm/10V 0210H -
-- Sn217
Analog Speed Command Offset Adjustment
(Note 1)
mV 0211H -
-- Sn218
Analog Speed Command Limit
(Note 1)
rpm 0212H -
-- Sn226 Analog speed command filter Hz
0220H
2220H
-- Sn227 ZS Zero speed judgement signal delay time ms
021BH
221BH