7-129
EC924 E-Cam rotary cut return origin return function
【
5-6-15
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 - 0 ~ 1 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0820H -- -- O -- -- -- --
Setting Description:
Setting Description
0 Original curve
1 Return to Origin
EC925 The number of points of the E-cam self-built curve
【
5-6-15
】
Initial Value Unit Setting Range Effective Cn029 Reset
10 - 10 ~ 500 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0821H -- -- O -- -- -- --
EC926 The number of cycles of the main axis of the E-cam self-built curve
【
5-
6-15
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 - 0 ~ 536870912 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0822H/0823H -- -- O -- -- -- --
EC927 Right shift of uncompensated value of the E-cam self-built curve
【
5-6-
15
】
Initial Value Unit Setting Range Effective Cn029 Reset
6 - 1 ~ 16 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0824H -- -- O -- -- -- --
Setting Description: The larger the value, the more compensation is divided into multiple compensations, and the
compensation curve is less to have jump point, but if it is greater than the number of points that can
be compensated in one cycle, the AL.023 protection will be triggered.
To Next Page
Loading...
