2-20
(2) JSDG2S-EL CN1 terminal configuration diagram:
Pin definitions Function Pin definitions Function
PIN1 DI-1 Digital input contact 1 PIN14 /PA Divided output/A phase
PIN2 DI-2 Digital input contact 2 PIN15 PB Divided output B phase
PIN3 DI-3 Digital input contact 3 PIN16 /PB Divided output/B phase
PIN4 DI-4 Digital input contact 4 PIN17 PZ Divided output Z phase
PIN5 DI-5 Digital input contact 5 PIN18 /PZ Divided output/Z phase
PIN6 DI-6 Digital input contact 6 PIN19 DOCOM
DO power common terminal
(NPN/PNP)
PIN7 DI-7 Digital input contact 7 PIN20 IP24 +24V power output
PIN8 DI-8 Digital input contact 8 PIN21 IG24 +24V power ground terminal
PIN9 DO-1 Digital output contact 1 PIN22 DICOM DI power shared terminal
PIN10 DO-2 Digital output contact 2 PIN23 AG Analog signal ground terminal
PIN11 DO-3 Digital output contact 3 PIN24 AG Analog signal ground terminal
PIN12 ZO Origin signal input PIN25 -- --
PIN13 PA Divided output A phase PIN26 -- --
Note:1. Do not connect unused terminals or use them as relay terminals.
2. The shielding cable of the I/O signal cable should be connected to the outer casing of the connector.
To Next Page
Loading...
