Introduction
Repackaging for Shipment
Save the original shipping carton and packing material in case it is ever
necessary to reship the instrument by a commercial transport carrier. If
the original materials are unfit or not available, then repackage the instru
ment using the following procedure.
1. Use a corrugated cardboard shipping carton with a test strength of at
least 275 pounds and an inside dimension at least six inches greater
than the instrument dimensions.
2. If instrument is being shipped to a Tektronix Service Center, enclose
the following information: owner's address, name and phone number
of a contact person, type and serial number of the instrument, reason
for returning, and a complete description of the service required.
3. Completely wrap the instrument with polyethylene sheeting or equiva
lent to protect the outside finish and keep harmful substances out of
the instrument.
4. Cushion instrument on all sides with three inches of padding material or
urethane foam, tightly packed between the carton and the instrument.
5. Seal the shipping carton with an industrial stapler or strapping tape.
6. Mark the address of the Tektronix Service Center and your own return
address on the shipping carton.
2245A Operators 1-7
To Next Page
Loading...
