Tektronix 2245A - Internal Settings Menu

Operators Familiarization
Internal Settings M enu
The INTERNAL SETTINGS MENU (see Figure 3-5) consists of MAKE FAC
TORY SETTINGS and ADJUST VERTICAL OUTPUT. MAKE FACTORY
SETTINGS can be performed by the operator; ADJUST VERTICAL OUT
PUT is for use by servicing personnel. To return to SERVICE MENU, set the
up-arrow key to underline INTERNAL SETTINGS MENU and press the but
ton again to display the SERVICE MENU. To return to the oscilloscope
mode, select QUIT from the INTERNAL SETTINGS MENU or SERVICE
MENU, or press the CLEAR MEAS'MT button.
INTERNAL SETTINGS MENU/
MAKE FACTORY SETTINGS
T MENU-
ADJUST VERTICAL OUTPUT
QUIT-
(CH 1)
(ADD)
(CH 4)
6558-14
Figure 3-5. Internal Settings Menu.
MAKE FACTORY SETTINGS. Sets the front-panel controls and menu con
figurations as described in Appendix B.
3-12 2245A Operators