Tektronix 7613 - sm_Page_224.tif

7613 and 7623 OPTION 5
Instruments containing OPTION 5 are designed to operate on any
power Line Frequency from 50 Hz to 400 Hz.
If your instrument
was ordered with OPTION 5 it will differ from the basic instrument
to the extent described in this option supplement.
Refer to the
main portion of this manual or the change section at the back for
all other information concerning your instrument.
ELECTRICAL PARTS LIST
B1001 119+0396-00 FAN, Axial, 50-400 Hz, 115 V
c1002 285-0562 ~-00 0.47 uF, Cer, 400 V
MECHANICAL PARTS LIST
441+1201-00 1 CHASSIS, oscilloscope
378-0050-00 1 BAFFLE, air
211-0530~00 4 SCREW, 6-32 x 1.750
344-0116-00 1 CLIP, capacitor mounting
131-0761-00 3 TERMINAL POST, screw mounting
211-0504-00 3 SCREW, 6-32 x .250
211-0008-00 1 SCREW, 4-40 x .250
211-0507-00 4 SCREW, 6-32 x .312
119-0396-00 1 FAN, axial, 50-400 Hz, 115 V
Cc = oh
om = 3
u i
[ {
~~
$
~o—
Ht
x S100 ~ |
83.3°C S1001
POWER
(PULL)
0 3
Soo
Bi00!
& F 1000 TEe1002
47
Pi00d
®
rekr &
PANEL
GROUND GROUNDED
AT PLUG-IN
HOUSING }
_ M20,879/1173
763 «1623 PARTIAL
LVPOWER SUPPLY
7613