Installation
1-14
CSA7000B Series & TDS7000B Series Instruments User Manual
The Product Software CD also contains accessory software and files that you can
choose to install in the instrument or in another computer. Refer to the instruc-
tions that accompany the CD for installation information.
GPIB Programmer Online Help Software. You can install the GPIB Programmer
online help on the instrument, but it may be more convenient to install it on the
PC that is functioning as the GPIB system controller. From the system controller,
you can copy and paste commands from the help directly into your test pro-
grams. The programmer information contains the following content:
H GPIB configuration information for the instrument
H Lists of the command groups and the commands they contain
H Detailed command descriptions including syntax and examples
H Status and error messages
H Programming examples
The CD also contains a printable version of the programmer information in the
form of a PDF file.
Manual Performance Verification Procedure. This is a printable PDF file that
describes how to verify the instrument performance using generic test equip-
ment.
User manual. This is a PDF file of this user manual.
Serial Mask User Manual. This is a PDF file that describes how to use the serial
mask features of the instrument.
Optional Accessory Software. The Optional Applications Software CD contains
programs that you can install and run five times per application. You can then
purchase an upgrade from Tektronix if you decide that you want to continue to
use the application. Refer to the instructions that accompany the CD for
installation information.
You can install desktop application software on the instrument. The instrument
has been tested with the following software products installed:
H Microsoft Office 2000 (including Word, Excel, Powerpoint, and Access)
H MathCad
H MATLAB
Accessory Software
Desktop Applications
To Next Page
Loading...
Need help?
General
