Oscilloscope Reference I2C addressing mode
The amount of m emory.
The a bility to combine the memory length of unused channels.
NOTE. Hi Res and Avg m odes require twice the acquisition memory of other acquisition modes. When you
select these modes, the instrument sets the record length accordingly to keep it from running out of memory.
Delay mode.
WhenDelayModeisOffthescaleexpandsorcontractsaroundthetrigger point (see page 690).
When Delay Mode is On the scale e xpands or contracts around the horizontal reference point.
Horizontal zoom. You can use the Horizontal Zoom control window
(see page 197) to change the
horizontal scale and position of reference waveforms within the Zoom window(s).
What do you want to do next?
Learn more about the Horizontal Setup controls. (see page 841)
I2C addressing mode
In the Addressing Mode drop-down list, select the bit addressing mode.
Increment/Decrement buttons
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 843
To Next Page
Loading...
Need help?
General
