Tektronix TBS1000C Series User Manual

Setting the oscilloscope to factory default values - Default Setup
Default Setup clears the current oscilloscope settings and loads factory-defined
settings. This lets you quickly reset the oscilloscope to a known state before
setting up to take a new measurement.
See Setting the oscilloscope to factory default values - Default Setup on page 77.
To return the oscilloscope to its factory default settings:
1. Push Default Setup.
2. If you change your mind, push Undo Default Setup side-menu button to
return the oscilloscope to the settings present before you pushed Default
Setup. You must push this button before doing any other action.
Acquisition setup
TBS1000C Series Oscilloscopes User Manual 77

Tektronix TBS1000C Series Specifications

General

Brand	Tektronix
Model	TBS1000C Series
Category	Test Equipment
Language	English