Tektronix TBS1000C Series User Manual

How to enable / disable cursor in the oscilloscope
Use this procedure to enable / disable cursor manually.
NOTE. To disable or enable the Cursor function requires a password. The default
factory password is 000000.
NOTE. An instructor in a TekSmartlab
™
-equipped education lab can enable or
disable Cursor from the TekSmartLab application, for all connected
oscilloscopes.
1. Push Utility.
2. Push Feature Enable side-menu button.
Analyzing a waveform
106 TBS1000C Series Oscilloscopes User Manual

Tektronix TBS1000C Series Specifications

General

Brand	Tektronix
Model	TBS1000C Series
Category	Test Equipment
Language	English