Installation
Unpacking the Oscilloscope
Unpack the oscilloscope and check that you received all items listed as standard
accessories. The following pages list recommended accessories and probes,
oscilloscope options, and upgrades. Check the Tektronix Web site
(www.tek.com) for the most current information.
Standard Accessories
TPP0100 (TBS1052C, TBS1072C) 10X Passive Voltage Probe,
The TPP0100 probes have a system bandwidth of DC to 100 MHz at –3 dB and ship
standard with TBS1000C oscilloscope models that have bandwidths up to 100 MHz.
TPP0200 (TBS1102C, TBS1202C) 10X Passive Voltage Probe.
The TPP0200 probes have a system bandwidth of DC to 200 MHz at –3 dB and ship
standard with TBS1000C models with bandwidths greater than 100 MHz.
TBS1000C Oscilloscope Compliance and Safety Instructions. (English, Japanese,
Simplified Chinese) (071-3223-XX) A single printed document is included. Refer to the
Optional Accessories for a complete list of available language manuals.
Power cord Specify plug option
NIM/NIST Traceable certificate of calibration
5-year warranty Covers labor and parts for defects in materials and workmanship for 5 years, excluding
probes and accessories Probes and accessories are not covered by the oscilloscope
warranty and service offerings. Refer to the data sheet of each probe and accessory model
for its unique warranty and calibration terms.
TBS1000C Series Oscilloscopes User Manual 3
To Next Page
Loading...
Need help?
General
