Australia / New Zealand
Declaration of Conformity
– EMC
Complies with the EMC provision of the Radiocommunications Act per the
following standard, in accordance with ACMA:
■
CISPR 11. Radiated and conducted emissions, Group 1, Class A EN
61326-1 and EN 61326-2-1. Radiated and conducted emissions, Group 1,
Class A.
FCC – EMC
Emissions are within the limits of FCC 47 CFR, Part 15, Subpart B for Class A
equipment.
Safety compliance
This section lists the safety standards with which the product complies and other
safety compliance information.
EU Low Voltage Directive
Compliance was demonstrated to the following specification as listed in the
Official Journal of the European Union:
Low Voltage Directive 2014/35/EU.
■
EN 61010-1. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 1: General Requirements.
■
EN 61010-2-030. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 2-030: Particular
requirements for testing and measuring circuits.
U.S. nationally recognized
testing laboratory listing
■
UL 61010-1. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 1: General Requirements.
■
UL 61010-2-030. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 2-030: Particular
requirements for testing and measuring circuits.
Compliance information
xx TBS1000C Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
