1. Push Utility.
2. Push Feature Enable side-menu button.
3. Use the Multipurpose knob to select and click Change Password. The
oscilloscope opens the Change Password entry screen.
4. Use the Multipurpose knob and side-menu buttons to select the
alphanumeric and enter characters for the current password.
5. Push OK side-menu button.
6. Use the Multipurpose knob and side-menu buttons to enter the new
password to confirm it.
7. Push OK side-menu button.
Analyzing a waveform
122 TBS1000C Series Oscilloscopes User Manual
To Next Page
Loading...
