Use only specified replacement parts.
Do not operate in wet/damp conditions.
NOTE. Be aware that condensation may occur if a unit is moved from a cold to a
warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry. Remove the input signals before you clean
the product.
Provide proper ventilation. To ensure proper cooling, keep the sides and rear of
the instrument clear of obstructions. Slots and openings are provided for
ventilation and should never be covered or otherwise obstructed. Do not push
objects into any of the openings.
Provide a safe working environment. Always place the product in a location
convenient for viewing the display and indicators. Avoid improper or prolonged
use of keyboards, pointers, and button pads. Improper or prolonged keyboard or
pointer use may result in serious injury. Be sure your work area meets applicable
ergonomic standards. Consult with an ergonomics professional to avoid stress
injuries. Use care when lifting and carrying the product. This product is provided
with a handle or handles for lifting and carrying.
Use only the Tektronix rackmount hardware specified for this product.
Probes and test leads
Before connecting probes or test leads, connect the power cord from the power
connector to a properly grounded power outlet.
Keep fingers behind the finger guards on the probes.
Remove all probes, test leads and accessories that are not in use.
Use only correct Measurement Category (CAT), voltage, temperature, altitude,
and amperage rated probes, test leads, and adapters for any measurement.
Beware of high voltages. Understand the voltage ratings for the probe you are
using and do not exceed those ratings. Two ratings are important to know and
understand:
■
The maximum measurement voltage from the probe tip to the probe reference
lead
■
The maximum floating voltage from the probe reference lead to earth ground
These two voltage ratings depend on the probe and your application. Refer to the
Specifications section of the manual for more information.
Important safety information
TBS1000C Series Oscilloscopes User Manual xv
To Next Page
Loading...
Need help?
General
