Application Examples Viewing Results -Reset from High Speed Measurement
2. Select the More button to display the following tests:
Receiver Sensitivity
Suspend
Reset High Speed
Packet Para
meter
Chirp
Resume
Reset From Suspend
3. Select the Reset from High Speed measurement.
Configuring the Measurement
Follow these steps to configure the selected measurements:
1. From the application menu, select Measurement > Configure > Configure tab.
2. Configure the following options:
Option Set to
Signal Direction
Upstream
Source D+ Ch1-Ch4, Ref1-Ref4
D – Ch1-Ch4, Ref1-Ref4
xxx
3. Select to acquire the data.
Vi
ewing Results -Reset from High Speed Measurement
To
view the results of the tests, follow these steps:
1. Run the application and from the application menu, and select Results > Summary.
114 TDSUSB2 Universal Serial Bus Measurements Package
To Next Page
Loading...
