Operating Basics Setting Up the Device Details
Setting Up the Device Details
You can enter a unique identifier (ID) and description for the unit under test (device). The identifier and the
descrip
tion appear in the generated reports for the tests performed on the unit under test. You can either
type in the text directly in the boxes for these fields, or use the keypad or a keyboard. You can also choose
to generate automatic IDs for the unit or enter a prefix using the keypad.
NOTE. If you check the Generate Automatic ID, the Device ID field is disabled and the Prefix field
is enabled. The report for Inrush Measurement displays details of the S ignal Setup with the device
description.
24 TDSUSB2 Universal Serial Bus Measurements Package
To Next Page
Loading...
Need help?
General
