Temptronic ThermoStream TP04300 Series User Manual

3
SYSTEM OPERATION
Password at Startup
3-16 TP04300 Series Interface & Applications Manual
Password at Startup
Introduction The system allows passwords to be assigned which allow Access to system functions at three
levels: Basic, Medium, Full.
Functions not available in Basic or Medium Access are still displayed on the screen as "grayed
out" (in lighter colors) fields and do not execute when pressed.
The password and Access level are input on the Utilities Screen.
Access
Level
Functions: TP04300
BASIC
Run to pre-set Setpoint(s); Load pre-programmed tests.
No changes.
See TP04300 Operator Manual
MEDIUM
Run to & Change Setpoint(s); Load & Setup tests;
Datalog: record new datalogs; review saved datalogs;
Temporary changes (no Save)
FULL
Run to Setpoints; Setup tests;
Datalog & Print;
Assign, change Passwords/Access levels;
Configure system; Calibrate sensors; Defrost;
Permanent changes: Load, Rename, Save, Delete

Temptronic ThermoStream TP04300 Series Specifications

General

Brand	Temptronic
Model	ThermoStream TP04300 Series
Category	Industrial Equipment
Language	English