5
ROUTINE MAINTENANCE
TC Meter Calibration (TC Meter Mode)
5-46 TP04300 Series Interface & Applications Manual
TC Meter Calibration (TC Meter Mode)
TC Meter Calibration
Introduction
Some Test Setups do not allow an external temperature sensor to be interfaced with the DUT.
The TC Meter Mode uses the Main Air sensor (with offsets) to allow the system to achieve a
DUT setpoint without interfacing a DUT sensor.
The operator must know the offsets before using TC Meter Mode.
There are 2 methods for calibrating in TC Meter Mode.
• Manual
• External Sensor
Manual is the recommended method. This method requires the setpoints (Low and High) and
the known offsets to be manually entered into the Calibration fields.
External Sensor is not currently available in Software Version 4.2
Once TC Meter Mode has been chosen from the Calibration Select Sensor Screen, the
following dialog box will appear:
1980_532.jpg
Manual Method
(TC Meter)
1980_533.jpg
To Next Page
Loading...