Temptronic ThermoStream TP04300 Series User Manual

. . . . .
SYSTEM OPERATION
Printing Datalogs
TP04300 Series Interface & Applications Manual 3-55
Printing Datalogs
To install a Printer
to the TP04300
Step Action
1 Shutdown the system. Press "Off" on Statusbar Display to exit ThermoStream
Control Software. See System Shutdown, page 3-17.
2 Attach printer, and keyboard (and preferably, also attach mouse) to front panel
ports. See OCM User Interfaces “OCM Cable Ports”, page 3-10
3 Startup the System. Press front panel On-only momentary switch to energize
system. See System Startup, page 3-15 if needed.
4 MicroSoft Windows NT operating system then begins to boot.
5 When the solid blue screen appears, which progressively displays the NT
Version number, the System Processor/memory test, Drivers being loaded, etc.,
press and continue to hold down, the SHIFT Key.
6 If no mouse is installed, then use keyboard as follows: to navigate forward,
field by field, press TAB key; to navigate backward, press SHIFT +TAB key
7 At Logon Info dialog box, type "administrator" (do not type quotation marks)
in "User Name" field, then press "OK"
8 When Windows NT "Desktop" appears, click: Start | Settings | Printers | Add
Printer | then choose "My Computer" (do NOT click "Configure Port," do NOT
click "Add Port"), then click "Next"
9 At "Select Printer" dialog box, scroll down, checkmark desired printer to select
it, then click "Next"
10 Click radio button "Not shared with other printers," then click "Next"
11 If you wish to "Print Test Page?" then choose this option, then click "Finish"
12 Do NOT insert a floppy diskette when prompted, "Please insert floppy...into
Drive A:", instead, click "OK"
13 At prompt, "Copy files from:", type "D:\Ntinst" (this filename is case sensitive,
type capital and lower case letters as given here; do not type quotation marks),
then click "OK"
14 Press Start | Shutdown, then click "Close all programs and log on as different
user," and click "Yes"
15 At Logon Message dialog prompt, "System could not log you on ...", click
"OK"
16 At Logon dialog box, in User Name field, type "X-Stream" (this password is
not case sensitive)
17 Then, in Password field, type "X-Stream" (this password is not case sensitive),
then press "OK"
18 The ThermoStream Control Software (TSCS) operating system will boot.

Temptronic ThermoStream TP04300 Series Specifications

General

Brand	Temptronic
Model	ThermoStream TP04300 Series
Category	Industrial Equipment
Language	English